Skip to content

ko-fi

Welcome

to my infosite about Anycubic's Kobra Go and Kobra Neo.

Here you'll find specific information about both models as well as more general kind of information.

I created this site to make it easier for users of these printers to get started, as well as to provide specific information on e.g. how to maintain the printers.

Please make sure to mind the (expandable) textboxes as they contain valuable information!
Depending on the color of the box, it's either a tip, information, instruction, question or warning you'll find in there:

Tip

Like "Level the position of the ABL sensor in relation to the nozzle."

Information

Like "Information about nozzles in general."

Instruction

Like "How to disassemble the hotend."

Warning

Textboxes which contain a warning will often be displayed being already extended to make sure the warning won't be overseen.

Danger

Textboxes which contain a warning about a dangerous circumstance will often be displayed being already extended to make sure the warning won't be overseen.

Please mind the search field in the header as well as the icon in the header for toggling between the bright and the dark mode of this site.

Please take your time and read attentively.

Happy tinkering and printing!

If you want to support my work, you can do so by donating to my ko-fi account.

If you own a Printables account, please consider liking my models (I'm trying to collect PrusaPoints.. ;) ).

If you own a GitHub account, please consider starring this repository.

If you want to contribute an e.g. modification (aka "MOD") you did or an important information you found, please send me an email - please don't open Pull Requests!

If you find this infosite useful, please consider recommending it to others. This will make the community aware of it and help other users.

Thank you!

Thanks To The Supporters And Contributers!
  • Thanks a lot to Anthony for donating a spare part printhead of the Go and the Neo for further investigations!
  • Thanks a lot to the kind people who supported my work with a donation to my ko-fi account!
  • Thanks to the stargazers at GitHub for starring this repository!
  • Thanks to aspiringnobody for reporting and providing the picture of the GC6609 stepper drivers being used!
  • Thanks to Balambao for taking a picture of the ceramic heater block!
  • Thanks to BlackStab1337 for taking a picture of the different V5 heater blocks!
  • Thanks to BlackSunBeast for taking pictures of the feeder gear of the Go and the Go itself!
  • Thanks to Consistent_Leopard46 for letting me use his picture of the faulty initial layer which illustrates the problem of a broken extruder motor wiring!
  • Thanks to Darth_Kram for disassembling the feeder gear box of the Go, taking those pics and measuring the dimensions of those parts!
  • Thanks to Due-Telephone-6817 for taking those pictures of the spider coupler and the diaphragm coupler!
  • Thanks to felixna for allowing me to use his circuit drawing of how to add a step-down converter for PWM controlled fans!
  • Thanks to GruesomeJeans for taking pictures of the spare parts of the bed, the magnetic foil, the mounted z-axis limit switch and the ruby tipped nozzle!
  • Thanks to Imaginary_Gift_8533 for allowing me to use his picture of the wear & tear of his wheels!
  • Thanks to I_Sells_Drugs for taking pictures of his sheared off heatbreak!
  • Thanks to Island-Strange for taking a picture of his shortcut bed!
  • Thanks to Jaximus for allowing me to use the picture of the slipped out cartridge heater!
  • Thanks to JD154 for the pics of and notes about the aluminum belt tensioners!
  • Thanks to jokubasver for taking that screenshot of the config settings for compiling the klipper.bin and for allowing me to use his picture of the stock control unit being used for KlipperScreen!
  • Thanks to McNeillTrevor for sharing his solution of using a Beacon3D probe at the Kobra Neo and allowing me to use his picture!
  • Thanks to MeckeMecke for allowing me to use the picture of his direct drive mod for the Go using a Revo CR an an Orbiter V.2!
  • Thanks to mowerheimen for allowing me to use the picture of the crooked x-axis gantry!
  • Thanks to Sad-Lie8181 for taking a picture of his dual z-driven Neo!
  • Thanks to simpleman118 for taking a picture of the ABL height gauge!
  • Thanks to the-transponster for allowing me to use the picture of his clumped hotend!
  • Thanks to Yoriko_Rayne_ for allowing me to use the picture of how to use the ABL height gauge!
  • Thanks to zimmystor for taking pictures of his MicroSwiss bowden drive upgrade at his Go, of the stock heatbreak and of the TriGorilla V_3.0.7!
  • Thanks to zyssai for allowing me to use the picture of the diassembled stepper motor!

Disclaimer

  • I'm not responsible in any way if any damage or harm occurs!
  • Please be aware of the fact that you use and/or transpose everything at your own risk!
  • It can't be guaranteed that everything is correct and that it wouldn't harm your printer or even yourself - keep in mind that I'm NO expert by all means!
  • All information, tips, instructions, suggestions, mods and so on which could be found here should be considered as a base for your own further research!
  • Neither am I resposible for any content that I've linked to, it's just meant to be a further source of information to make the start of your own research a bit easier!

ko-fi