Skip to content

Printer

The Anycubic Kobra 2 Pro is a high speed FDM bedslinger style printer.
It comes pre-assembled, you only have to mount a few parts like the 'upstanding' frame onto the base frame.

See Anycubic's support page of the Kobra 2 series to find manuals, firmware, video tutorials and more or use the direct links in the following.

The following pictures show the machine.

Kobra 2 Pro frontview Kobra 2 Pro backview
Kobra 2 Pro front Kobra 2 Pro back

Note: I didn't attach the filament spool holder to the left side of the machine as it should be done when taking these pictures for being able to put both pictures between each other in a decent size here.

Specifications

The following list gives an overview of the most important specifications:

  • Printing dimension: 250 x 220 x 220 mm / 9.8 x 8.7 x 8.7 inches (HxWxD)
  • Printing platform: 220 x 220mm / 8.7 x 8.7 inches (Attention: the physical dimensions of the bed and the PEI plate are 230x230mm!)
  • Machine dimensions: 486 x 435 x 463 mm / 19.1 x 17.1 x 18.2 inches (HxWxD) (plus filament holder mounted to the left side of the base frame)
  • Machine weight: approx. 8.4 kg
  • Printing volume: 12.1 l / 3.2 gal
  • Aluminum frame
  • X-axis and Y-axis: belt driven (belt tension can be adjusted by knobs), "dual-shaft core" with SG15 bearings/metal rollers (no POM wheels)
  • Z-axis: double threaded rod
  • Printing speed: 500 mm/s (maximum speed), 300mm/s (typical/average speed)
  • Control panel: 4.3" LCD touchscreen
  • Mainboard: TriGorilla Spe V1.0.0, 1.2GHz Cortex-A7, 32bit, 24V, TMC2209 silent stepper drivers (soldered), WiFi, 3x USB-A connectors
  • Extruder / feeder system: direct drive, double gears
  • Heated aluminum bed with a magnetic foil glued onto it, comes with a removable, single side PEI-coated spring steel plate; physical dimensions: 230x230mm
  • Hot bed temperature: 110 °C / ≤ 230 °F
  • Automatic leveling: "Anycubic LeviQ2.0" (which is a 25-point bed level measuring process) and "smart Z-offset"
  • Power supply: 400W, 24V DC output, suitable for 110V/230V AC input (set the correct voltage with a switch before using it!)
  • Printing material: PLA / ABS / PETG & TPU (optional housing recommended for certain material)
  • Single nozzle in a proprietary Volcano-type hotend, filament diameter 1.75 mm
  • Comes with a proprietary Volcano-like 0.4 mm brass nozzle which is replaceable
  • Nozzle temperature: 260°C / ≤ 500 °F
  • Filament run-out detection sensor

Box Content

The printer comes partially preassembled and well packed in one big box.

Box content

Along with the printer come some additional parts, like a sample of PLA, a USB drive, some tools, a spare nozzle and so on. You can see these items in the following picture.

Additional parts

ko-fi