Printer¶
The Anycubic Kobra 2 Plus is a high speed FDM bedslinger style printer.
It comes pre-assembled, you only have to mount a few parts like the 'upstanding' frame onto the base frame.
See Anycubic's support page of the Kobra 2 series to find manuals, firmware, video tutorials and more or use the direct links in the following.
The following pictures show the machine.
Kobra 2 Plus frontview | Kobra 2 Plus backview |
---|---|
The following picture shows the printer from the sideview, so you can see the stabilizer rods better.
Specifications¶
The following list gives an overview of the most important specifications:
- Printing dimension: 400 x 320 x 320 mm / 15.75 x 12.6 x 12.6 inches (HxWxD)
- Printing platform: 320 x 320mm / 8.7 x 8.7 inches (Attention: the physical dimensions of the bed and the PEI plate are 330x330mm!)
- Machine dimensions: 630 x 605 x 564 mm / 24.8 x 23.8 x 22.2 inches (HxWxD) (plus filament holder mounted to the left side of the base frame)
- Machine weight: approx. 13 kg
- Printing volume: 40.9 l / 10.8 gal
- Aluminum frame
- X-axis and Y-axis: belt driven (belt tension can be adjusted by knobs), "dual-shaft core" with SG15 bearings/metal rollers (no POM wheels)
- Z-axis: double threaded rod, two motors
- Printing speed: 500 mm/s (maximum speed), 300mm/s (typical/average speed)
- Control panel: 4.3" LCD touchscreen
- Mainboard: TriGorilla Spe V1.0.0, 1.2GHz Cortex-A7, 32bit, 24V, TMC2209 silent stepper drivers (soldered), WiFi, 3x USB-A connectors
- Extruder / feeder system: direct drive, double gears
- Heated aluminum bed with a magnetic foil on the top surface and an insulation at the underside glued onto it, comes with a removable, single side PEI-coated spring steel plate; physical dimensions: 330x330mm
- Hot bed temperature: 90 °C / ≤ 190 °F
- Automatic leveling: "Anycubic LeviQ2.0" (which is a 49-point bed level measuring process) and "smart Z-offset"
- Power supply: 400W, 24V DC output, suitable for 110V/230V AC input (Set the correct voltage with a switch before using it!)
- Printing material: PLA / ABS / PETG & TPU (optional housing recommended for certain material)
- Single nozzle in a proprietary Volcano-type hotend, filament diameter 1.75 mm
- Comes with a proprietary Volcano-like 0.4 mm brass nozzle which is replaceable
- Nozzle temperature: 260°C / ≤ 500 °F
- Filament run-out detection sensor
Box Content¶
The printer comes partially preassembled and well packed in one big box.
Unfortunately I don't have pictures of the box content of the Kobra 2 Plus, so I'll show you the box content of the Kobra 2 Pro instead - besides the obviously different parts of the machine itself, it'll basically be the same.
Along with the printer come some additional parts, like a sample of PLA, a USB drive, some tools, a spare nozzle and so on. You can see these items in the following picture.