Back to TOC
Back to chapter 16
17. Further Informations and Sources
A lively exchange regarding the here presented hardware and software
takes place in the following forum: https://forum.fhem.de/index.php/topic,29762.0.html
This is also a good place for questions, exchange of experience and
support, including informations about updates.
All documentation for the hardware and software presented here
as well as the different software versions can be found here.
This manual is also available here as a PDF version.
The software and related documentation for the use of the here presented adapter in conjunction with a Raspberry Pi 2 is available here.
For the use of the adapter with an RPi at the PPS interface the Python script “PPS-monitor” can be used.
The initial idea of connecting some kind of adapter for gaining access via BSB/LPB and the process that led to this solution can be found here and here.
As a relatively extensive source with many parameter descriptions the “Brötje System Manual ISR Plus” is recommended to read. Besides numerous other and model-specific instructions it’s like a basic ‘reference’ for the parameter definitions.
For informations about the different controllers it’s always worthy searching for “Albatros 2”.
In-depth informations such as specifications and technical requirements of the bus types can be found in the respective documents of the manufacturer. Especially regarding the LPB, two documents from “Siemens Building Technologies - Landis & Staefa Division” are recommended:
- CE1N2030D Local Process Bus LPB system basics
- CE1N2032D Local Process Bus LPB Configuration Basics
Regarding the installation and usage of DHT22 and OneWire sensors such as the DS18B20 there are numerous sources of information. Especially the official DataSheets of the manufacturers should be read. Besides the already mentioned documents in the specific chapters, there are many free tutorials, example installations and scripts available throughout the internet.
